You can try rebooting the router.. That might clear up any cache.David--Thanks, David"Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one."Thomas JeffersonOn Sun, May 28, 2017 at 3:30 PM, Te Bussell <welfarecat@comcast.net> wrote:Interesting that ifconfig shows only the assigned static IP. So maybe that is not my problem. I can ping both addresses, and the router GUI shows the same device name and MAC address on both IP. Thanks for mentioning ifconfig.
Sent from my iPadSorry strike what I said in the last email. If the raspberry pi is setup for dhcp then the pi would only get one IP address. So look at the pi ifconfig see if it does has two addresses.DavidOn May 28, 2017 2:26 PM, "David Shaw" <shawpbx@gmail.com> wrote:The router should release the dhcp address after the time has expire. About 72 hours.DavidOn May 28, 2017 12:25 PM, "Te Bussell" <welfarecat@comcast.net> wrote:I bought a new Netgear router because the older one had problems. The new Netgear R6220 assigns an IP address to my wired R Pi node, but I also assigned a static IP. Both of these internal IP addresses are "pingable". I want delete the DHCP assigned address. I think this is causing a problem. Any suggestions?
Cheers - 73
Bill KB9WKR
Sent from my iPad
_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rp t-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rp and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"t-users
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem._______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_ rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_ and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"rpt-users
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_ rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_ and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"rpt-users
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.