Sure would be great... you working on it ?
You have plenty of i/o options with a parallel port. Built-in to
app_rpt as one of it's standards. Been there a very long time.
Changed a little bit about 10 years ago.
And you can test logic outputs via commands. No need to re-invent the wheel for little benefit.
if you want those avenues on the small, low power and cheap,
I would suggest as I did before in this mail list over 4 years ago when everyone was headed to the Pi and BBB and give a Intel board a try.
D2700MUD mini-itx Intel ATOM
fanless 2.13mhz up to 4gb ram and has parallel port that can make all your cos/ptt for 4 nodes, no problem without hacking your usb dongle.
Simply use the parallel port for all your switching logic (needs
buffered). I put the needed pp info in the wiki but it may need
some additional to be complete. Enough there to make it work. You
have 4 inputs and 8 outputs as declared in app_rpt.
find a used one on ebay... this one $25 add a 12v itx power
supply if you need that. You will need to buy ram.
Been using them for many years. Going to make my 5yr old spare a
radioless mobile with a touch screen after failing to cram all the
junk I wish to use into a pi. Just have not got around to it yet.
Wrong time of year to get started on it as well. Going to control
things in and on the car as well. Perhaps when I am seeking air
conditioning.... LOL
If that can't solve your i/o issues, you are going to have to go
out on your own or hope/wait till someone else does. But this
changes often enough that I don't like to sink that much time into
it anymore. Only for what I want to do. The next unknown changes
can make all of your work wasted or a constant battle to re-work.
...mike/kb8jnm
Would be great if there was a standard virtual device that could be connected to different physical radio interfaces.
/dev/radio0/ptt/dev/radio0/cos/dev/radio0/ctcss& other signals
Then anyone building software could support /dev/radio and it would provide audio in/out and various signals
Testing would be simplified too, could just cat /dev/radio0/cos to check for signal or echo 1 > /dev/radio0/ptt.
William
On Thu., Apr. 18, 2019, 11:42 p.m. George Csahanin, <george@dyb.com> wrote:
Steve that looks like exactly what I was fishing for. But how to
integrate? I can easily drop the source file into the channels/
directory and compile but how to make them and use them. I saw the
Aussie web site this may have come from but cannot download from them
(non-VK callsign).
On 4/17/2019 8:56 AM, Steve Zingman wrote:
> 2 years ago, Stacy, KG7QIN forked a repo I created with a number of
> GPIO enabled channel drivers including a modification to USBRadio and
> SimpleUSB to add RPi GPIO support.
> <https://github.com/KG7QIN/ASL_GPIO>
>
> Steve N4IRS
>
---
This email has been checked for viruses by AVG.
https://www.avg.com
_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.