On 17/07/2011 9:01 AM, "Andrew Gilbett" <andrew.gilbett@gmail.com> wrote:
> Either edit beagle_tune1.conf (the name of the file is like that but may be
> different) in /etc/asterisk or use
>
> beagle tune rx abc
>
> where abc is between 0 & 999
>
> Regards Andrew
> vk2xag
> On 17/07/2011 2:25 AM, "Ken Leisten" <k995996@gmail.com> wrote:
>> Yes, thanks its working and on line. Next question is how do I adjust
> tx/rx
>> audio for each port on the LOX. "Radio-tune-menu" doesnt seem to exist.
>>
>> Ken
>>
>> On Sat, Jul 16, 2011 at 9:00 AM, <app_rpt-users-request@ohnosec.org>
> wrote:
>>
>>> Send App_rpt-users mailing list submissions to
>>> app_rpt-users@ohnosec.org
>>>
>>> To subscribe or unsubscribe via the World Wide Web, visit
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>> or, via email, send a message with subject or body 'help' to
>>> app_rpt-users-request@ohnosec.org
>>>
>>> You can reach the person managing the list at
>>> app_rpt-users-owner@ohnosec.org
>>>
>>> When replying, please edit your Subject line so it is more specific
>>> than "Re: Contents of App_rpt-users digest..."
>>>
>>> Today's Topics:
>>>
>>> 1. CURL error (George Csahanin)
>>> 2. Exp reflector (Neal Garbenis)
>>> 3. Re: Exp reflector (Bryan Boyle)
>>> 4. Re: Echolink Ka-CHunk nodes? (Phil N6TCT)
>>> 5. Re: Exp reflector (Neal Garbenis)
>>> 6. FWIW... (Bryan D. Boyle)
>>> 7. Re: Pico node configuration (Dale Weber)
>>>
>>>
>>> ---------- Forwarded message ----------
>>> From: "George Csahanin" <george@dyb.com>
>>> To: "app_rpt mailing list" <app_rpt-users@ohnosec.org>
>>> Date: Fri, 15 Jul 2011 12:13:45 -0500
>>> Subject: [App_rpt-users] CURL error
>>> **
>>> When trying to use the web transciever I get this:
>>>
>>> ERROR[26440]: pbx.c:1550 ast_func_read: Function CURL not registered
>>>
>>> I do have curl...:
>>>
>>> [root@radio ~]# curl --help
>>> Usage: curl [options...] <url>
>>> Options: (H) means HTTP/HTTPS only, (F) means FTP only
>>> -a/--append Append to target file when uploading (F)
>>> -A/--user-agent <string> User-Agent to send to server (H)
>>> --anyauth Pick "any" authentication method (H)
>>> -b/--cookie <name=string/file> Cookie string or file to read cookies from
>>> (H)
>>> --basic Use HTTP Basic Authentication (H)
>>> -B/--use-ascii Use ASCII/text transfer
>>> -c/--cookie-jar <file> Write cook
>>>
>>> What is "*Function CURL not registered"*
>>> **
>>> ??
>>>
>>> GeorgeC
>>> W2DB
>>> **
>>>
>>>
>>> ---------- Forwarded message ----------
>>> From: Neal Garbenis <njgarbenis@gmail.com>
>>> To: app_rpt-users@ohnosec.org
>>> Date: Fri, 15 Jul 2011 17:44:26 -0400
>>> Subject: [App_rpt-users] Exp reflector
>>> I am trying to make a experimental asterisk and irlp reflector. I went
>>> through the svn and found chan- irlp and a older version of app-rpt. I
> had
>>> the system working for a day or so and then it stopped.
>>>
>>> My question is has anyone done this before. If so how did you do it? My
>>> irlp exp is 0054.
>>>
>>> Neal
>>>
>>>
>>> ---------- Forwarded message ----------
>>> From: Bryan Boyle <bdboyle@bdboyle.com>
>>> To: Neal Garbenis <njgarbenis@gmail.com>
>>> Date: Fri, 15 Jul 2011 18:07:24 -0400
>>> Subject: Re: [App_rpt-users] Exp reflector
>>> support for irlp was taken out by the authors of asterisk at Cameron's
>>> demand...did not want asterisk to cross connect to 'his' network, from
> what
>>> I understand. those closer please feel free to fill in or correct.
>>>
>>> --
>>> Bryan
>>> Sent from my iPhone
>>> please forgive misspellings...
>>>
>>>
>>>
>>> On Jul 15, 2011, at 5:44 PM, Neal Garbenis <njgarbenis@gmail.com> wrote:
>>>
>>> > I am trying to make a experimental asterisk and irlp reflector. I went
>>> through the svn and found chan- irlp and a older version of app-rpt. I
> had
>>> the system working for a day or so and then it stopped.
>>> >
>>> > My question is has anyone done this before. If so how did you do it? My
>>> irlp exp is 0054.
>>> >
>>> > Neal
>>> > _______________________________________________
>>> > App_rpt-users mailing list
>>> > App_rpt-users@ohnosec.org
>>> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>>
>>>
>>> ---------- Forwarded message ----------
>>> From: Phil N6TCT <phil.n6tct@gmail.com>
>>> To: Ken Page <vk4akp@yahoo.com.au>
>>> Date: Fri, 15 Jul 2011 16:25:42 -0700
>>> Subject: Re: [App_rpt-users] Echolink Ka-CHunk nodes?
>>> Hi Ken.
>>>
>>> I have not seen this exact problem, but I have seen a problem where
>>> echolink users connect to our allstar/echolink node but no audio is
>>> passed. They can key up the node but it just transmits a carrier with
>>> no audio. For some, possibly most, echolink users it works just fine.
>>> I have chalked this up to either bad audio configuration on the
>>> echolink user's end or bad port forwarding configuration, but have not
>>> done any real investigation.
>>>
>>> I have not seen the continuous kerchunking that you describe. (And I
>>> hope that I don't, that sounds super annoying!) Sorry ...
>>>
>>> Phil, N6TCT
>>>
>>> On Thu, Jul 14, 2011 at 8:21 PM, Ken Page <vk4akp@yahoo.com.au> wrote:
>>> > Hi,
>>> >
>>> > I seem to be getting a huge amount of Echolink Ka-Chunk nodes that just
>>> log
>>> > in and then I'm left with a connection that just key's up and down
>>> > constantly every few seconds with no audio all day until I notice and
>>> hang
>>> > it up..
>>> >
>>> > Do I need to update some of the All_Star software or something to get
>>> around
>>> > this?
>>> >
>>> > It's something that has only started in the last month or so.
>>> >
>>> > 73 de Ken - vk4akp@gmail.com
>>> > All_Star:2134 - vk4rkp - 146.725Mhz -Neg.
>>> > Echolink: 7878
>>> > .-.-.
>>> > _______________________________________________
>>> > App_rpt-users mailing list
>>> > App_rpt-users@ohnosec.org
>>> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>> >
>>>
>>>
>>>
>>> ---------- Forwarded message ----------
>>> From: Neal Garbenis <njgarbenis@gmail.com>
>>> To: Bryan Boyle <bdboyle@bdboyle.com>
>>> Date: Fri, 15 Jul 2011 19:30:29 -0400
>>> Subject: Re: [App_rpt-users] Exp reflector
>>> Yes you are correct but it is ok to have exp reflectors to tie both
>>> networks together. This is what I am trying to do
>>>
>>> Sent from my iPhone
>>>
>>> On Jul 15, 2011, at 6:07 PM, Bryan Boyle <bdboyle@bdboyle.com> wrote:
>>>
>>> > support for irlp was taken out by the authors of asterisk at Cameron's
>>> demand...did not want asterisk to cross connect to 'his' network, from
> what
>>> I understand. those closer please feel free to fill in or correct.
>>> >
>>> > --
>>> > Bryan
>>> > Sent from my iPhone
>>> > please forgive misspellings...
>>> >
>>> >
>>> >
>>> > On Jul 15, 2011, at 5:44 PM, Neal Garbenis <njgarbenis@gmail.com>
> wrote:
>>> >
>>> >> I am trying to make a experimental asterisk and irlp reflector. I went
>>> through the svn and found chan- irlp and a older version of app-rpt. I
> had
>>> the system working for a day or so and then it stopped.
>>> >>
>>> >> My question is has anyone done this before. If so how did you do it?
> My
>>> irlp exp is 0054.
>>> >>
>>> >> Neal
>>> >> _______________________________________________
>>> >> App_rpt-users mailing list
>>> >> App_rpt-users@ohnosec.org
>>> >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>>
>>>
>>> ---------- Forwarded message ----------
>>> From: "Bryan D. Boyle" <bdboyle@bdboyle.com>
>>> To: app_rpt mailing list <app_rpt-users@ohnosec.org>
>>> Date: Fri, 15 Jul 2011 22:34:06 -0400
>>> Subject: [App_rpt-users] FWIW...
>>> Some photos of the installation of active nodes 27294/27295/27774
>>> (others are in abeyance, running under pseudo/usbxxxxx)
>>>
>>> Hope no one minds posting the URL. It's a work in progress...
>>>
>>> http://www.wb0yle.com/rptr.htm
>>>
>>> 73 BB WB0YLE
>>>
>>>
>>>
>>> ---------- Forwarded message ----------
>>> From: Dale Weber <n7pkt@picklejar.org>
>>> To: app_rpt-users@ohnosec.org
>>> Date: Fri, 15 Jul 2011 20:02:19 -0700
>>> Subject: Re: [App_rpt-users] Pico node configuration
>>> On Wednesday, July 13, 2011 07:10:22 PM Ken Leisten wrote:
>>> > Hi all,
>>> >
>>> > Got Pickle Linux copied to a flash card and running on my
> beagleboard/LOX
>>> > node. It walked me through changing some network settings for IP,
>>> gateway,
>>> > subnet etc., but it never asked me for a node number or tried to
> download
>>> > configuration from the allstar portal. I tried forcing a config through
>>> the
>>> > portal but this doesn't seem to work either. What am I missing?
>>>
>>> Got to node configuration, and select the server and node you want
>>> to run on
>>> Beagle/LOX. Then select your radio interface type as beagle
> (BeagleBoard-xM
>>> with LOX board). Then you will see a selection for port. Port 1 is
> closest
>>> to
>>> the Ethernet connector on Beagle. Finally, download the server
>>> configuration
>>> with your node to the Beagle with/LOX.
>>>
>>> That should do it!
>>>
>>> 8-Dale
>>>
>>>
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users@ohnosec.org
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>>