Ok, next problem...

Limey works, and boots. Now working through the set up scripts.

I'm following the instructions in the support section...
https://allstarlink.org/support.html

In order to configure your server to allow the Portal to generate configuration files for the server, you first must download a local configuration shell script and execute it. Please do the following:
cd /tmp
curl -L https://allstarlink.org/config/portalconfig.sh -o foo.sh
sh foo.sh ; rm foo.sh

The Curl part works and downloads a file. I can see the file foo.sh in the directory.
When I run the script... the second line.. I get an error  

" foo.sh line 15 function not found"

I searched through the list to see if others have saw this, there are 3 posts relating to foo.sh, but no follow-ups/answers..

What to do now?

Randy


On Sun, Oct 28, 2012 at 7:37 PM, Randy Neals <randy@neals.ca> wrote:
Problem solved! onward we go.
Jim politely reminded me to use the correct limey image on the D2700MUD Mobo. :)
(I was using he standard i686 image)

For the benefit of others that are using teh D2700MUD Mobo here is the link.
http://stats.allstarlink.org/limeylinux/downloads/cfimg-D2700MUD.tar.gz

Ok, I'm now booted and going through the first-time config.


Randy/W3RWN


On Sun, Oct 28, 2012 at 6:57 PM, Randy Neals <randy@neals.ca> wrote:
Hi folks,

I received my parts this week and started building a node.
The parts I've acquired:
Intel D2700MUD Motherboard: http://www.intel.com/cd/products/services/emea/eng/motherboards/desktop/D2700MUD/overview/487677.htm
ARK CS-Ci02 mini-itx case:  http://www.arktechinc.net/server-case/cs-ci02.html
Crucial 2GB SODIMM DDR3PC3 memory

The D2700 Motherboard has an embedded USB storage header on the motherboard.
Rather than using a compact flash drive, I acquired some SanDisk 512MB Embedded USB Flash storage devices. (Found on eBay)

I downloaded the Limey Linux image, and used Physdiskwrite on my windows pc to write the image to the USB Flash drive.
Inserted the USB flash drive on the header, and gave it a rip.

You'll find pictures of the case, mobo and flash drive here.
http://www.neals.ca/w3rwn

Ok, so it boots... loads kernel, makes a ram disk, and runs through a long list of boot up things.
It mounts the root filesystem then seems to die.

VFS: Mounted root (ext2 filesystem) readonly on device 1:0
Freeing unused kernel memory: 292k freed
EXT2-fs warning: checktime reached, running e2fsck reccomended

There is no command prompt, so not sure what I should be doing next?  Doh!

I'm going to try a different boot image for linux, and check out the hardware independently.

Thanks,
Randy
W3RWN (ex KI6TWT)