I made the edit to the file, however it still did not work.

Here is the response I got.

Perhaps I am not executing it from the correct place?

root@N6LXX-1:~# rpt fun 29876 *989
-bash: rpt: command not found

thank you

Chris

From: Tim Sawyer <tim.sawyer@me.com>
To: C B <harvard5362@yahoo.com>
Cc: "app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org>
Sent: Monday, August 19, 2013 3:45 PM
Subject: Re: [App_rpt-users] Audio level test tone with Beagleboard xm and LOX board.

Take the semicolon off the *989 line, restart asterisk and you'll be able to make tone.

Tim

:wq

On Aug 19, 2013, at 1:55 PM, C B <harvard5362@yahoo.com> wrote:

Hi

Tried to get the test tone as per some of the instructions I have read thus far.

I have looked at the rpt.conf file and it looks like it is set up to use *99 as it has the line in it *99=cop,6.

The line with *989=cop,4 had a ; (semicolon) in for of it so I assume it is disabled.

When I type on the CLI rpt fun 29876 *99 it does not send tone.

Please tell me what I have done wrong.

Thank you in advance for your help.

Chris

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users