> Date: Thu, 17 Nov 2011 09:30:49 +1000
> From:
vk4akp@yahoo.com.au
> To:
app_rpt-users@ohnosec.org
> Subject: Re: [App_rpt-users] Zaptel & newer Kernels.
>
> Hi Guys,
>
> Well another week rolls by and although the Asterisk is
running here the
> TDM card and all DMK URI interfaces still remain offline
basically
> making us uncontactable this end.
>
> I am wondering if there are any plans to update Zaptel to
work with the
> newer kernels that don't have the IOCTL stuff?
>
> Or perhaps fix the Dahdi bugs?
>
>
> Regards,
> Ken - vk4akp
> .-.-.
>
> >> ------------------------------
> >>
> >> Message: 2
> >> Date: Mon, 14 Nov 2011 06:51:59 -0600
> >> From: "Jeremy R. Geeo
[KD?EAV]"
<kd0eav@gmail.com>
> >> To:
app_rpt-users@ohnosec.org
> >> Subject: Re: [App_rpt-users] Install fails at
zaptel on Gentoo system
> >> Message-ID:
<4EC10EEF.2060102@gmail.com>
> >> Content-Type: text/plain; charset=UTF-8;
format=flowed
> >>
> >> Hey Ken,
> >>
> >> Glad to see a fellow Gentoo(er) on the list.
> >>
> >> I don't know if you require such a new kernel;
but 3.1.0 is very new
> >> (especially for Zaptel).
> >>
> >> Last I knew, (but this may have since been
patched) the zaptel modules
> >> won't compile as-is on any kernel before 2.6.28
(ish - I may be off a
> >> version or two, don't remember). I've only
succeeded in making it work
> >> up to 2.6.35 (becuase I DID need a newer kernel
for hardware support).
> >> In 2.6.36 they drop support for the ioctl call
> >> (
http://lwn.net/Articles/119652/).
> >>
> >> I haven't followed (or caught up) on changes
since about 2.6.36, so I
> >> don't know what has changed going into 3.0 and
beyond.
> >>
> >> While trying to refresh my memory, I did find
this zaptel patch (which
> >> is actually for openWRT) which may be a step in
the right direction for
> >> the 2.6.36 barrier...
> >>
https://dev.openwrt.org/browser/packages/libs/zaptel-1.4.x/patches/370-2.6.36.patch
> >>
> >> I've also found it handy to go into the config
on zaptel and disable
> >> many/most of the modules - I specifically only
need ztdummy (and it's
> >> dependencies). In your case, I assume you don't
need support for
> >> pciradio. Probably no sense troubleshooting that
module if you're not
> >> going to use it.
> >>
> >>
> >>
> >> 73
> >>
> >> - Jeremy, KD0EAV
> >>
> >>
> >
> > ------------------------------
> >
> > Message: 2
> > Date: Mon, 14 Nov 2011 17:53:49 -0800
> > From: Jim Duuuude
<telesistant@hotmail.com>
> > To:
<vk4akp@yahoo.com.au>, app_rpt mailing list
> >
<app_rpt-users@ohnosec.org>
> > Subject: Re: [App_rpt-users] How2 get radio stuff
working with
> > Dahdi???
> >
Message-ID:
<BLU155-W2488C2DBD79A3C7A0B3B3BB1C10@phx.gbl>
> > Content-Type: text/plain; charset="iso-8859-1"
> >
> >
> > well, thats just all well and wonderful except that
DAHDI DOESNT WORK!
> > Yes, it *STILL* has the *SAME* *STUPID* bugs in it
that I had to fix
> > in Zaptel. It isnt going to work for a radio project
stock.
> >
> > JIM WB6NIL
> >
> _______________________________________________
> App_rpt-users mailing list
>
App_rpt-users@ohnosec.org
>
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users