you have to come in from a second node for it to work.

you come in from node A connect to node B. Then put node B in remote command mode then any dtmf that comes in from node A
will be re-generated then sent out the rxchannel from node B to the device that is connected to it.

and what is controlled is specified by the channel driver you specify in the rxchannel=  statement.

many people use that to control cross connected repeater controllers, irlp nodes, etc.

i have been doing that for at least 2 years now. it works very nicely to do control of a remote node.

i use it to control a dstar to allstar bridge using rtpdir and also to control a cross connected wires-x node on a windows machine.

I also use the inlax and outlax lines in the rpt.conf to remap the * and # digits.

this is how it is supposed to work Skyler.

ken n1dot

On 9/21/2016 4:30 AM, Steve Agee wrote:
inxlat=*,#,0123456789ABCD ; funchar,endchar,passchars

N5ZUA

On 9/20/2016 11:00 PM, Skyler F wrote:
I need to rebroadcast all DTMF out of the transmitter. I have enabled the function propagate_dtmf=yes in my rpt.conf. The tones are still being silenced, however out of my full duplex system running DSP. Any suggestions? 

Thanks,
Skyler KD0WHB





_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 



_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.



Avast logo

This email has been checked for viruses by Avast antivirus software.
www.avast.com