Not sure if your name is Jah, or Bob. But at any rate, I recently setup my first simplex allstar node and managed to hit the wrong command sequence and triggered a long train of announcements listing all the connected nodes. You mean to say that I'm not the only one who heard that? Most embarrassing. It eventually stopped abruptly and I did find myself disconnected. Hmm...

On Sun Jan 11 2015 at 8:26:09 PM Jah Rastafari <nuhtrue@gmail.com> wrote:

Yeah, I can wait and see what develops. It's not the end of the world; it's just getting the online status is better manners than subjecting

everyone (who isn't on a repeater with unnecessary Alison jabbering turned off) having to hear 30 repeater connections listed over the air...

Bob/KK6RQ

On Sun, Jan 11, 2015 at 8:28 PM, <mike@midnighteng.com> wrote:

You could be having some problems with internet host (especially if it
is comcast).
Probably temporary, don't go changing your settings over it just yet.
Give it a few days and reboots (computer and router) to see how it pans
out.

...mike/kb8jnm

> -------- Original Message --------

> Subject: Re: [App_rpt-users] Node Status not showing...
> From: Jah Rastafari <nuhtrue@gmail.com>

> Date: Sun, January 11, 2015 9:20 pm
> To: mike@midnighteng.com,  "app_rpt-users@ohnosec.org"
> <app_rpt-users@ohnosec.org>
>
>
> I went back right after reading your reply (several hours after my original
> post) and it in fact came up the way it should. But then 5 minutes
> later it went back to saying I wasn't connected. I'm not sure what it means
> but I can say I've never seen it behave like this before.
>
> On Sun, Jan 11, 2015 at 4:56 PM, <mike@midnighteng.com> wrote:
>
> >
> >
> >
> > Not sure but....
> >
> > I think you are only suffering from a delay of the update to the list.
> >
> > Try waiting for a short while (up to 30min) and look again.
> > Others have said it takes that long sometimes but I have only witnessed
> > about 5-6min.
> >
> > Guess it depends on how busy the server is.
> >
> >
> > ...mike/kb8jnm
> >
> > > -------- Original Message --------
> > > Subject: [App_rpt-users] Node Status not showing...
> > > From: Jah Rastafari <nuhtrue@gmail.com>
> > > Date: Sun, January 11, 2015 5:29 pm
> > > To: "app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org>
> > >
> > >
> > > Forgive me if this has already been discussed and I missed it, but I just
> > > noticed recently that although I was connected to a number of other
> > > nodes/repeaters, the 'Node Status' selection on the Allstar site says I'm
> > > not connected to anything. My node(s) show up properly in the available
> > > node list and everything else is as it should be. The Web Transceiver
> > works
> > > properly also and I haven't changed anything recently. Am I missing
> > > something?
> > >
> > > Bob/ KK6RQ<hr>_______________________________________________
> > > App_rpt-users mailing list
> > > App_rpt-users@ohnosec.org
> > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> > >
> > > To unsubscribe from this list please visit
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> > to the bottom of the page. Enter your email address and press the
> > "Unsubscribe or edit options button"
> > > You do not need a password to unsubscribe, you can do it via email
> > confirmation. If you have trouble unsubscribing, please send a message to
> > the list detailing the problem.
> >

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.