I've used these successfully
$6.99 sungle with shipping.
3 units for $6.04 each, 5 for
$5.84 each, all includes shipping.
But (one more pitch) you do not
need to modify if you just use the FOB for audio and use the
parallel port for COR and PTT.
GeorgeC
----- Original Message -----
Sent: Tuesday, September
27, 2011 8:09 PM
Subject: Re:
[App_rpt-users] installation disk
No, your not spinning your wheels. Check out the URI at the URL
below. Or if you'd rather roll your own the Startech (http://www.newegg.com/Product/Product.aspx?Item=N82E16829128004)
is a viable option.
On Sep 27, 2011, at 12:18 PM, Bradley Haney wrote:
So i guess i am kind of spinning my wheels trying to
load up a computer of this software if i can't interface
my radio unless i have a lox/beagle board .. WHen will
the thin client be available?
On Tue, Sep 27, 2011 at 1:54 PM,
Bradley Haney
<kc9gqr@gmail.com>
wrote:
OK i thought it went throught the
computer's sound card.
On Tue, Sep 27, 2011 at
12:55 PM, Tim Sawyer
<tim.sawyer@me.com>
wrote:
The only
supported audio is through USB, the
too-expensive QuadPCI card, a LOX/Beagle
board, or the soon to be released thin client.
On Sep 27, 2011, at 9:50 AM,
Bradley Haney wrote:
Yep, no porblem wiping out the
computer.. I will get a new some
new dvd's or cd's and try it again
tonight maybe that is the issue..
As for the interface basically was
just wanting to know if you can use
a serial port instead of a USB
port..
Thanks for your help.
On Tue, Sep
27, 2011 at 11:46 AM, Tim Sawyer
<tim.sawyer@me.com>
wrote:
You are aware that the ACID
install will wipe out your
Windows load?
It doesn't mater if you
drag it or click it as long as
it shows up in the left pane
of Disk Utility.
I don't think it maters that
it's a 32 bit motherboard.
I don't know what a rascall
interface is. Interfaces which
I know to work are the DMK
Engineering URI (
http://dmkeng.com/URI_Order_Page.htm),
modified USB sound fobs as
detailed on the Drupal web
site (
http://ohnosec.org/drupal/node/27)
and PLRI board (
http://www.qsl.net/k0kn/plri.html)
Let us know how it goes.
On Sep 27, 2011,
at 7:41 AM, Bradley
Haney wrote:
i will
try it that way of
dragging it.. I
used the disk
utility but i
think i clicked on
the DMG image and
burned that.. I
will give it another
shot.. The computer
i am using is a
compaq computer
that has windows
xp but its a 32
bit mother board
will that matter?
Also will i be able
to use my rascall
interface or will i
have to purchase a
different adapter..
On
Tue, Sep 27, 2011
at 8:30 AM, Tim
Sawyer
<tim.sawyer@me.com>
wrote:
Did
you use the
Disk Utility
application to
burn the iso
image or the
Finder? Finder
will just copy
the image onto
the CD, which
won't be
bootable. Open
Disk Utility
and then drag
the iso image
into the left
pane, make
sure it is
highlighted
and press the
burn icon.
On Sep
26, 2011, at
8:54 PM,
Bradley Haney
wrote:
For some
reason i
burned the iso
image on my
mac and put
the new dvd in
the windows
computer to
load up but
for some
reason it
tries to read
and then does
nothing.. I
have already
went into the
bios to set up
to boot from
CD rom but no
joy.. I then
booted that
machine into
windows and i
was able to
read the disk
so i know the
DVD drive is
working but
still can't
get the
computer to
boot .. is
there a
installation
disc i can
just purchase.
also has
anyone used a
rascal
interface with
this system?
Bradley Kc9gqr
_______________________________________________
App_rpt-users
mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users