Ok, That was dumb. I added the Duplex line in the rpt.conf file, and didn't think about a conflict with the usbradio.conf. Next question, now that it works, I have an annoying squelch tail, how do I eliminate that?
usbradio.conf
[usb27179]
hdwtype=0
rxboost=1
txboost=1
rxctcssrelax=1
txctcssdefault=103.5
rxctcssfreqs=103.5
txctcssfreqs=103.5
;rxctcssoverride=0
carrierfrom=dsp
ctcssfrom=dsp
rxdemod=flat
txprelim=yes
txlimonly=no
txtoctype=notone
txmixa=composite
txmixb=no
invertptt=0
duplex=0 :Change this line as well as in the rpt.conf
rxondelay=0
rxnoisefiltype=0
eeprom=0
usbradio_tune_usb27179.conf
[usb27179]
; name=usb27179
; devicenum=2
devstr=5-2
rxmixerset=500
txmixaset=15
txmixbset=500
rxvoiceadj=0.500000
rxctcssadj=0.500000
txctcssadj=500
rxsquelchadj=500
On Mon, Jan 17, 2011 at 4:40 PM, Buddy Brannan
<buddy@brannan.name> wrote:
Oh yeah, and also be sure to put
duplex=1
in usbradio.conf
--
Buddy Brannan, KB5ELV - Erie, PA
Phone: (814) 860-3194 or 888-75-BUDDY
On Jan 17, 2011, at 7:21 PM, KI6PSP (Ed) wrote:
> At first I thought it was an RF problem, so I dropped filters in. Still the same problem, so I thought floating ground. I disconnected the TX Radio, and it still does it.
>
> When I key my handheld, the RX radio feeds the Discriminator audio to my URI and Asterisk hears me. But for some reason, it acts like I am just kerchunking it. I see the output in the Asterisk Console for the "Donk" every few seconds. I am not unkeying it, but it is acting like I am. Now granted, I don't have a service monitor to output the proper tone for the "radio tune rxtone" to set properly, but it works just fine on half duplex.
>
> Did I miss something?
> All I changed was the "Duplex=1" ---> "Duplex=2"
> I would really love to fully deploy this repeater, now that I have all of the parts I need.
> --
> KI6PSP (Ed)
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users@ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
--
KI6PSP (Ed)