----- Original Message -----
Sent: Thursday, March 25, 2010 8:06
PM
Subject: [App_rpt-users] non-USA-standard
repeater offset for freq-agileradios
I have added (still experimental) code in app_rpt version 0.211
(available this
evening in SVN) to attempt to support non-USA-standard
repeater offsets
for frequency agile radios. I have tested the code on a
TMG-707A, but not
on any of the other models supported, which are TM-271,
TM-D700, FT-897
and IC-706. The other radios did not seem to support such
functionality.
There are 2 ways of configuring this:
the new
rpt.conf parameters (that go into the node clause
in rpt.conf), are split2m
and split70cm, which specify the
default offset for 2 meters and 70
centimeters in kilohertz.
split2m = 600
split70cm =
5000
You may also specify the offset in a memory channel
by
adding an additional parameter before the options,
for example:
01 =
147.435,103.5,1035,h-t ; This would be for W6NUT in Los Angeles with
input of 146.40
JIM WB6NIL
_______________________________________________
App_rpt-users
mailing
list
App_rpt-users@qrvc.com
http://qrvc.com/mailman/listinfo/app_rpt-users