I used no special procedure for the ASL Pi,

Just make sure you have a good working setup of  ASL Raspbian Stretch

and start off with these instructions for that.

http://dvswitch.org/files/ASL_Images/Raspberry_Pi/Stretch/ASL_1.01-20180228-armhf-raspbian-stretch-image.readme

...mike/kb8jnm


On 7/15/2018 12:31 PM, qrz@tg9aor.net wrote:

I followed the procedure stated on Question 4 under the AllStarLink Wiki onto my Raspberry Pi 3B+ with Debian Stretch. First signs of deviation from the normal output I saw that, since I had installed the CompassLinux repository to install ambeserver, as I gave the command to install the raspberry pi kernel headers, the kernels had the compass attached to the version numbers of the archives being installed. I configured the node for dahdi/pseudo use. I ran the command asterisk -c to see the initial output, output below.

 

AllStarLink Asterisk Version 1.01 2/13/2018 GIT Version adaec47

Copyright (C) 1999 - 2018 Digium, Inc. Jim Dixon, AllStarLink Inc. and others.

Created by Mark Spencer <markster@digium.com>

Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details.

This is free software, with components licensed under the GNU General Public

License version 2 and other licenses; you are welcome to redistribute it under

certain conditions. Type 'core show license' for details.

=========================================================================

[ Booting...

[ Reading Master Configuration ]

[ Initializing Custom Configuration Options ]

[Jul 15 22:20:03] NOTICE[25155]: dnsmgr.c:394 do_reload: Managed DNS entries will be refreshed every 300 seconds.

[Jul 15 22:20:03] NOTICE[25155]: cdr.c:1416 do_reload: CDR simple logging enabled.

[Jul 15 22:20:03] NOTICE[25155]: loader.c:874 load_modules: 55 modules will be loaded.

..............[Jul 15 22:20:03] WARNING[25155]: chan_iax2.c:12750 load_module: Unable to open IAX timing interface: No such file or directory

......................................... ]

Asterisk Ready.

*CLI> [Jul 15 22:20:04] NOTICE[25161]: app_rpt.c:22184 rpt_master: Normal Repeater Init  48455

[Jul 15 22:20:04] WARNING[25176]: chan_dahdi.c:928 dahdi_open: Unable to open '/dev/dahdi/pseudo': No such file or directory

[Jul 15 22:20:04] ERROR[25176]: chan_dahdi.c:7906 chandup: Unable to dup channel: No such file or directory

rpt:Sorry unable to obtain Rx channel

[Jul 15 22:20:04] WARNING[25161]: app_rpt.c:22240 rpt_master: rpt_thread restarted on node 48455

[Jul 15 22:20:04] WARNING[25178]: chan_dahdi.c:928 dahdi_open: Unable to open '/dev/dahdi/pseudo': No such file or directory

[Jul 15 22:20:04] ERROR[25178]: chan_dahdi.c:7906 chandup: Unable to dup channel: No such file or directory

rpt:Sorry unable to obtain Rx channel

[Jul 15 22:20:06] NOTICE[25161]: app_rpt.c:22228 rpt_master: RPT thread restarted on 48455

[Jul 15 22:20:06] WARNING[25161]: app_rpt.c:22240 rpt_master: rpt_thread restarted on node 48455

[Jul 15 22:20:06] WARNING[25179]: chan_dahdi.c:928 dahdi_open: Unable to open '/dev/dahdi/pseudo': No such file or directory

[Jul 15 22:20:06] ERROR[25179]: chan_dahdi.c:7906 chandup: Unable to dup channel: No such file or directory

rpt:Sorry unable to obtain Rx channel

[Jul 15 22:20:08] NOTICE[25161]: app_rpt.c:22228 rpt_master: RPT thread restarted on 48455

[Jul 15 22:20:09] WARNING[25161]: app_rpt.c:22240 rpt_master: rpt_thread restarted on node 48455

[Jul 15 22:20:09] WARNING[25181]: chan_dahdi.c:928 dahdi_open: Unable to open '/dev/dahdi/pseudo': No such file or directory

[Jul 15 22:20:09] ERROR[25181]: chan_dahdi.c:7906 chandup: Unable to dup channel: No such file or directory

rpt:Sorry unable to obtain Rx channel

[Jul 15 22:20:11] NOTICE[25161]: app_rpt.c:22228 rpt_master: RPT thread restarted on 48455

[Jul 15 22:20:11] WARNING[25161]: app_rpt.c:22240 rpt_master: rpt_thread restarted on node 48455

[Jul 15 22:20:11] WARNING[25183]: chan_dahdi.c:928 dahdi_open: Unable to open '/dev/dahdi/pseudo': No such file or directory

[Jul 15 22:20:11] ERROR[25183]: chan_dahdi.c:7906 chandup: Unable to dup channel: No such file or directory

rpt:Sorry unable to obtain Rx channel

[Jul 15 22:20:13] NOTICE[25161]: app_rpt.c:22228 rpt_master: RPT thread restarted on 48455

[Jul 15 22:20:13] WARNING[25161]: app_rpt.c:22240 rpt_master: rpt_thread restarted on node 48455

[Jul 15 22:20:13] WARNING[25185]: chan_dahdi.c:928 dahdi_open: Unable to open '/dev/dahdi/pseudo': No such file or directory

[Jul 15 22:20:13] ERROR[25185]: chan_dahdi.c:7906 chandup: Unable to dup channel: No such file or directory

rpt:Sorry unable to obtain Rx channel

[Jul 15 22:20:15] NOTICE[25161]: app_rpt.c:22228 rpt_master: RPT thread restarted on 48455

[Jul 15 22:20:15] WARNING[25161]: app_rpt.c:22240 rpt_master: rpt_thread restarted on node 48455

[Jul 15 22:20:15] WARNING[25187]: chan_dahdi.c:928 dahdi_open: Unable to open '/dev/dahdi/pseudo': No such file or directory

[Jul 15 22:20:15] ERROR[25187]: chan_dahdi.c:7906 chandup: Unable to dup channel: No such file or directory

rpt:Sorry unable to obtain Rx channel

[Jul 15 22:20:17] ERROR[25161]: app_rpt.c:22223 rpt_master: Continual RPT thread restarts, killing Asterisk

 

 

 

I removed the CompassLinux repository, did an update, did another raspberry pi kernel headers install, it all changed to normal version numbers without the Compass suffix/prefix attached to it but output is the same.

 

Do I need to flush everything and start fresh, or is there a procedure for Raspbian Stretch I need to follow?

 

 

Many thanks.

 

 

 

Jose Roberto Ruíz García Salas

TG9AOR

 

 



_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.