Bob,

Not sure what you are using but most ports have been 2.0 for quite awhile if you direct connect. The DMK URI is 2.0 but it will work at 1.1 also. I have used it that way. So I would say just plug it in and it should work.

73 Doug
WA3DSP
http://www.crompton.com/hamradio

From: kk6ecm@gmail.com
To: app_rpt-users@ohnosec.org
Date: Sun, 13 Apr 2014 21:27:52 -0700
Subject: [App_rpt-users] USB Frustrations

How does one go about finding a USB 2.0 on their computer? (required for URI)

I’m using a computer that indicates it has one USB 2.0 port (lsusb -v yields 001:001), and it does not show up on any of the physical USB ports... any of the 8 (6 in back and 2 up front); Older computer that I’m trying to use till my newer motherboard arrives. My fear is the USB 2.0 found is some overarching port without a physical location.

Is there a way of “assigning” a hub and port (2.0 required) to one of the physical ports on the computer?

BTW, I’m familiar with the old phrase, “Friends don’t let friends use USB.” In other words... humor this ol’ guy, and newbie to boot :-)

Thanks,

Bob

kk6ecm

_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.