So...(I'm a hacker, not a programmer)...as I understand this, if I get the new sources into my limey box I can compile them with the new source?
 
I have a slackware linux laptop where I made my own limey one time, and it worked fine (on a D201 board before you folkis combined that with the D945 stuff)
 
The ACID distro I downloaded on Saturday has to be right, it works like a champ on the printer port. Also, in the docs it does not mention that pin 11 is available, and I peeked at the source and found that it was, and it did work. The controller I married it to has COS on pin 11, I didn't feel like soldering.
 
OK, Jim, thanks for the info/insight.
 
GeorgeC
----- Original Message -----
From: Jim Duuuude
To: george@dyb.com ; jd0@broadsci.com ; app_rpt mailing list
Sent: Tuesday, August 30, 2011 9:28 PM
Subject: RE: [App_rpt-users] Parallel port I/O withchan_simpleusb/usbradiounder Limey Linux

That's an interesting question.

Normally, what we do is take a snapshot of the SVN sources and make the 'files.tar.gz' file which
contains the release version of the sources. This file is used both for ACID and Limey Linux. The ACID
version of this has been released already. The 1.1.5 version of Limey Linux is still in the "needs to be
verified" (without the Asterisk stuff first) stage. So, it *is* possible to make these changes "appear" in the
Limey distro. However, I am going to have to talk with Steve, WA6ZFT and see how he wants to handle
this.

JIM WB6NIL


From: george@dyb.com
To: telesistant@hotmail.com; jd0@broadsci.com; app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] Parallel port I/O withchan_simpleusb/usbradiounder Limey Linux
Date: Tue, 30 Aug 2011 21:23:53 -0500

Thank you, sir. Are you doing a new Limey store-bought tgz file, just add "dd"?
 
I tried rolling my own, and modified the kernel config for pp compiled in, not a module, and still didn't fly. I gave up and stuck with dsp decode of pl and cos. But I also suspect that the "motorboating" goes away if the software isn't doing all that other stuff, and just looking for a line to wiggle high ot low, etc. THAT allows easy interface to many radios.
 
Take care.
 
GeorgeC
W2DB
2360
----- Original Message -----
From: Jim Duuuude
To: george@dyb.com ; jd0@broadsci.com ; app_rpt mailing list
Sent: Tuesday, August 30, 2011 9:19 PM
Subject: RE: [App_rpt-users] Parallel port I/O withchan_simpleusb/usbradiounder Limey Linux

Well, it would pretty much appear that my suspicion is correct. The PP input
stuff NEVER worked under Limey Linux, and its pretty obvious why. I will
update the chan_usbradio and chan_simpleusb code to reflect this.

JIM WB6NIL

> From: george@dyb.com
> To: jd0@broadsci.com; telesistant@hotmail.com; app_rpt-users@ohnosec.org
> Subject: Re: [App_rpt-users] Parallel port I/O withchan_simpleusb/usbradiounder Limey Linux
> Date: Tue, 30 Aug 2011 20:54:00 -0500
>
> Hey guys, I really need some help with ppin. Works finew with ACID, ppx-ptt
> works fine, under both distros, pp in for cor just will not work in Limey,
> and I have no more hair to pull out. Does pp work as an input under Limey,
> and docs I find doesn't say it does not work, but I gave up hope and just
> deployed the system with a hard drive, which isn't the way I needed to go.
>
> Is it possible to use as an input?
>
> I have it loading parport and parport_pc, thies EPP and ECP in the bios, and
> every combination of setups. I know I have it configured right, same config
> worked just fine in ACID
>
> The only thing that could make Limey even more perfect is RTL8187 wireless
> support and parallel port input for COS.
>
>
> GeorgeC
> W2DB
>
>
> ----- Original Message -----
> From: "Jeff DePolo" <jd0@broadsci.com>
> To: "'Jim Duuuude'" <telesistant@hotmail.com>; "'app_rpt mailing list'"
> <app_rpt-users@ohnosec.org>
> Sent: Tuesday, August 30, 2011 8:00 PM
> Subject: Re: [App_rpt-users] Parallel port I/O
> withchan_simpleusb/usbradiounder Limey Linux
>
>
> >
> > Yes, I'm using them as BCD outputs to steer a "memory-agile" GE Delta-S
> > remote base radio under Limey. You'll probably recall you and I going
> > back
> > and forth on some bug fixes a while back to get it working. The biggest
> > problems were related to ioperm permissions; I think I fixed the last of
> > the
> > bugs myself.
> >
> > --- Jeff WN3A
> >
> >> -----Original Message-----
> >> From: app_rpt-users-bounces@ohnosec.org
> >> [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Jim Duuuude
> >> Sent: Tuesday, August 30, 2011 12:45 PM
> >> To: app_rpt mailing list
> >> Subject: [App_rpt-users] Parallel port I/O with
> >> chan_simpleusb/usbradiounder Limey Linux
> >>
> >> Has anyone ever successfully used the PPIO (*not* GPIO) extensions
> >> of chan_usbradio and/or chan_simpleusb under Limey Linux??
> >>
> >> I think I have run into one of those famous old "how in the world
> >> did this EVER work" sorta things. I dont think it did.
> >>
> >> If anyone has, please let me know.
> >>
> >> JIM WB6NIL
> >>
> >>
> >>
> >
> >
> >
>
>