Thats in the to do list. But I want to have it interfaced properly before doing this. Cause if I cant get those radio running good with allstarlink, I wont mess with the rest of the mods.. 



Le sam. 6 juil. 2019 à 02:05, Kirk Just Kirk <wb6egr@gmail.com> a écrit :
Make SURE you do the power control mod!!!!!! These radios do stupid things...like 2 watts one time and 18 the next time. They run hot. NOT a good choice for a Node radio.

On Fri, Jul 5, 2019 at 9:20 PM Pierre Martel <petem001@gmail.com> wrote:
Hello to the group, Got a pair of GTX900 mobile radio and got them tuned (mostly ok) to the ham band.

I now want to use them for repeater use in the 900 mhz band.

I went to repeater builder page and used all the info I could for the interfacing. 

I did went for flat audio connection, as stated on the gtx900 page I used pin 7 and 11 for the receiver audio out. And I did put the dip switch close to the interfacing jack to off as specified. I then tried to do a radio tune rxnoise but it always fail. I want to use the dsp fonction of usbradio as it is way easier then getting a cor output on the gtx900. 

Anyone ever used those radio with ASL?

thanks
VE2PF

_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.