Back in town...
 
Limey has this script, getsrc, that worked in the past. And yeah, looks at the tgz on the CF card, but that’s old source, so eliminated that file and it did download a source file, but it is August 2011 version, not new source. I can get the source from svn, no problem. The issue is that it suddenly won’t compile. ./configure is needed to run to make a Makefile. But I even tried just adding the line to the old source (chan_simpleusb.c) to add rxondelay. Can’t get configure to run without noting these errors. It claims the said .h file is missing, I just need to know where it needs to be. It exists, just (it seems) not in the right place.
 
And as to the vintage of the source, I recall that the source for asterisk on a limey platform was different and from a different place, but don’t know what/why/when.
 
GeorgeC
 
George J Csahanin
W2DB
Cedar Park, TX
512-401-2630 home
401-338-0568 cel
 
From: Tim Sawyer
Sent: Wednesday, September 17, 2014 9:25 AM
Subject: Re: [App_rpt-users] ping pong-somewhat demystified and a turn for the twilight zone
 
Actually I don’t think the upgrade runs configure.
--
Tim WD6AWP
 
On Sep 16, 2014, at 10:43 PM, George Csahanin <george@dyb.com> wrote:
 
Looks good, thanks. I always used the built in getsrc script. I still need to solve the compiler issue so I can actually do this upgrade.
 
Thanks, Tim.
 
George
 
George J Csahanin
W2DB
Cedar Park, TX
512-401-2630 home
401-338-0568 cel
 
From: Tim Sawyer
Sent: Tuesday, September 16, 2014 11:13 PM
Subject: Re: [App_rpt-users] ping pong-somewhat demystified and a turn for the twilight zone
 
Is there a reason not to use the normal upgrade procedure? https://allstarlink.org/support.html#astupgrade
--
Tim
:wq
 
On Sep 16, 2014, at 8:54 PM, George Csahanin <george@dyb.com> wrote:

OK, found an old message from Jim that says this was fixed by adding a line to make rxondelay work, and my source is from August 31 2011, which is two years before the fix. I’m going to step into the deep end here and ask a question that may seem like a limey question, but really a cpp question. ./configure output says cpp failed sanity test, look at the log file and I see that it was looking for an include file but cannot find it. The one in question is limits.h, supposedly in linux/limits.h and I looked in /usr/include and it is there. So, please, somebody learn me here. This has been a mystery to me since I started hacking this stuff in the early 90’s and proves why I should maybe stick to broken down TV stations...but...WHERE is it looking for this include file?
 
In limey the source all goes under /usr/src/astsrc/ then under that in /usr/src/astsrc/asterisk is where ./configure, etc is.
 
I tried loading new source, and the August 31, 2011 is what getsrc will download. So added question, assuming I can make this work, can I load the latest source code on the limey box, I have never seen anything different. But curious.
 
 
George J Csahanin
W2DB
Cedar Park, TX
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.