see:

http://kd3su.us/allStar/acid-sysadmin.pdf

The Alinco VHF/UHF DR-series rigs have a handy DB9 at the back.

You can set the radio to 9600 packet and use asterisk's DSP squelch, etc.

GL

Ken

-----Original Message-----
From: Peter Watkins <vk3tkk@yahoo.com.au>
To: app_rpt-users <app_rpt-users@ohnosec.org>
Sent: Mon, Feb 11, 2013 11:11 am
Subject: [App_rpt-users] New node assistance

Hi,

Recently, I've set the audio with a URI and an Alinco rig along with an app_rpt box (node 27183).

I'm a complete newbie to Asterisk/app_rpt and am interested in learning about the system.

I've looked and tried some of the commands on the ohnosec but I've had no success with the system.

Operating from the CLI (asterisk -r) I see the software detects TX via 'radio set debug' but, beyond that, I'm a little lost. I've also tried the troubleshooting page on the same website and everything seems OK, and I've set the appropriate port number on the router.

I'm quite happy to read and learn about the system - if someone could assist and put me in the right direction, I'd appreciate it.

73 Peter VK3TKK

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users