On Mon, Jul 9, 2018 at 10:29 AM Steve Zingman <szingman@msgstor.com> wrote:

cd /usr/src/asl-dahdi-linux-2.11.1/linux/
make
make install.

Be aware, if you build a custom kernel, you will need to make sure the headers match. If you are going to do this, build the kernel first. Verify OSS is working. that prepare the headers and rebuild DAHDI.
If you use the image and put the kernel and headers on hold, you will be able to do a apt-get upgrade safely.

Steve

On 7/9/2018 11:30 AM, JJC wrote:
So that is to say that I did a clean build (minimal) using the latest raspbian... followed the simple directions here: https://wiki.allstarlink.org/wiki/ASL_FAQ and ASL started up... (other than ASL recognizing the URI per the original post)... as one of the troubleshooting steps I reinstalled the raspberrypi-kernel-headers which broke dahdi and that's where I am now.. a broken dahdi install

On Mon, Jul 9, 2018 at 8:08 AM JJC <cummingsj@gmail.com> wrote:

Yeah but I didn’t use the image, I used your apt repo

Sent from the iRoad

> On Jul 9, 2018, at 07:31, Steve Zingman <szingman@msgstor.com> wrote:
>
> <http://dvswitch.org/files/ASL_Images/Raspberry_Pi/Stretch/ASL_1.01-20180228-armhf-raspbian-stretch-image.readme>
> Also included in the zip.
>
>> On 7/9/2018 9:20 AM, JJC wrote:
>> I didn’t see the requirement to hold those in any of the documentation that I read, maybe I just overlooked it....
>>
>> I’ll see what I can do today to fix the new (dahdi) issues.... and then the dsp issue....
>>
>> Sent from the iRoad
>>
>>>> On Jul 9, 2018, at 07:06, Bryan Fields <Bryan@bryanfields.net> wrote:
>>>>
>>>> On 7/8/18 12:44 AM, JJC wrote:
>>>> Didi a fresh install of the latest ASL from the repo on a fresh install of
>>>> raspbian on an RPI 3. The issue is simple... the pi sees the URI but ASL
>>>> seems to have issues..
>>> Did you follow the readme and do:
>>> sudo apt-mark hold raspberrypi-kernel-headers raspberrypi-kernel ?
>>>
>>>> I have included sample output from a variety of commands below which
>>>> clearly details the underlying OS sees the URI as it should, and the given
>>>> address etc...
>>>>
>>>> see the example output below...
>>>>
>>>> taken from /var/log/asterisk/messages
>>>> [Jul 7 22:19:46] WARNING[6703] chan_usbradio.c: Loaded parameters from
>>>> usbradio_tune_usb.conf for device usb .
>>>> [Jul 7 22:19:46] WARNING[6703] chan_usbradio.c: Unable to re-open DSP
>>>> device 1 (usb): No such file or directory
>>> Yea, newest raspbian removed the support for /dev/dsp (OSS) in the stock
>>> kernel. Holding back the old kernel will prevent you from needing to
>>> recompile the "new" kernel to get OSS back in it. The wrapper will not work
>>> as the modules depend on this.
>>>
>>> Sorry for the delay, been traveling :(
>>>
>>> --
>>> Bryan Fields
>>>
>>> 727-409-1194 - Voice
>>> http://bryanfields.net
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users@lists.allstarlink.org
>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users@lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users@lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.