Ken

Thanks for the help I got it to work

Add to rpt.conf to the box you want tones to pass from

propagate_dtmf = yes           ; DTMF sent to system from link gets

      ; repeated onto main system output(optional)

Then use the *4 remote command for that node.  Any dtmf tone will now pass through the link. This works great for my application it allows me to control a non asterisk controller from the other end.

Neal

From: Ken [mailto:ke2n@cs.com]
Sent: Friday, April 01, 2011 5:25 PM
To: 'Neal Garbenis'; app_rpt-users@ohnosec.org
Subject: RE: [App_rpt-users] regenerate dtmf touchtones

If “the controller” on the other end is Asterisk, then  you can use the “remote command” feature

http://ohnosec.org/drupal/node/21

You do *4 and the remote node number as the “command”.

After that, the next command you send to your local node gets passed through to the remote node - and executed there.

GL

Ken

KE2N

From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Neal Garbenis
Sent: Friday, April 01, 2011 7:08 PM
To: app_rpt-users@ohnosec.org
Subject: [App_rpt-users] regenerate dtmf touchtones

Is it possible to send or regenerate a dtmf tone  across a link without being muted.  I want to be able to control a linker II controller over the link if possible.  I have tried the ilink dtmf commands set up in macros with no success. They don’t make it through to the controller  I am trying to control on the other end.

Thanks

Neal

NG8Y