the scripts are on the k0kn site Tim mentioned earlier; the schematic for the interface is on the dmk site.  

--
Bryan
Sent from my iPhone 5...No electrons were harmed in the sending of this message.



On Aug 3, 2014, at 13:37, Skyler F <electricity440@gmail.com> wrote:

i can't find the scripts on dmkeng.com


On Sun, Aug 3, 2014 at 11:05 AM, Bryan D. Boyle <bdboyle@bdboyle.com> wrote:
using kyle's scripts and the curcuit on the dmkeng.com website nicely for a couple years.  No issues; start up at 20 sec into key up and run for 2 min after.  off rest of time.

--
Bryan
Sent from my iPhone 5...No electrons were harmed in the sending of this message.



On Aug 3, 2014, at 12:12, Tim Sawyer <tim.sawyer@mac.com> wrote:

You’ll probably find a script here you can use or adapt: http://www.qsl.net/k0kn/scripts.html
--
Tim
:wq

On Aug 3, 2014, at 9:06 AM, Skyler F <electricity440@gmail.com> wrote:

Hi,

I have some cooling fans. 

I would like to have the fans turn ON when the radio transmits, and stay on for sixty seconds after the radio stops transmitting and then turn off. 

I would like to use the I/O interface on my URIx. (The I/O will then trigger a Solid State Relay ,and then turn on the Fans)

How can I do this with the software? Can I write it with Scripts?

 What commands would I need to detect if it is sending a PTT, detect PTT off, wait time, turn the output to high, turn the output to low, always "look" for a TX, etc.

Example code is always really nice for a beginner like me :-)

73

Skyler
KDØWHB

--
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.



--
Skyler Fennell
amsatnet.info
KDØWHB
electricity440@gmail.com