Doug
Sorry I thought you were using iaxRpt, that’s why I mentioned the xelatec web site
Looking at the way mine is set up I see that I am calling the WAN address and port number (rather than the LAN address).
I don’t remember but this might have been the only way it worked. Worth a try.
My three PC’s are on port 4567, 4568 and 4569 so the address I am calling is (for example) 69.243.53.nnn:4568 (I will leave three digits nnn to your imagination)
The “name” is the Asterisk node number of course … some of the systems have more than one Asterisk node at the same IP:port
For the web transceiver - look for a typo in externsions.conf (extra semicolon)
[allstar-public]
Presumably, you have web transceiver access enabled in the Portal since it works from elsewhere?
Does this work properly from your PC?
?
Then look at the same [] stanza in iax.conf
[allstar-public]
type=user
context=allstar-public
auth=md5
secret=(will send you this separately)
disallow=all
allow=ulaw
allow=gsm
GL
Ken
From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Doug Hutchison
Sent: Wednesday, June 01, 2011 1:21 PM
To: app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] Web transceiver?
Hello Ken,
Thank you, yes both files exist. TXR works on other remote nodes as do normal connections. Is there an entry in one or other of these files which may be missing.
Regards,
D
On 01/06/2011 6:02 PM, Ken wrote:
Do you have the required config in iax.conf *and* extensions.conf?
it works on my LAN
GL
Ken
-----Original Message-----
From: Doug Hutchison <specialq.que@ntlworld.com>
To: app_rpt-users <app_rpt-users@ohnosec.org>
Sent: Wed, Jun 1, 2011 11:28 am
Subject: [App_rpt-users] Web transceiver?
Is it possible to run the transceiver from a machine on the same lan?