Notone
AKA chicken burst gives you carrier with no tone at the
end.
But
some radios are too slow in closing the CTCSS and still make
noise.
There
was a posting on here a while back that pointed the time delay in:
/usr/src/asterisk/asterisk/channels/xpmr/xpmr.h
The
default is 600 ms. Some radios might be slower than
this.
You
could change (increase) it, then make / make install and restart
asterisk.
My
Alinco DR-?35 series seem to want to give you a small squelch tail no matter
what you do, however…
73
Ken
From:
app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org]
On Behalf Of Jim Duuuude
Sent: Saturday, December 24, 2011 6:17
PM
To: w7ry@centurytel.net; app_rpt mailing list
Subject:
Re: [App_rpt-users] CTCSS Drop Out Time
try
txtoctype
= notone
in usbradio.conf
JIM WB6NIL
From: w7ry@centurytel.net
To: app_rpt-users@ohnosec.org
Date:
Sat, 24 Dec 2011 13:55:51 -0800
Subject: [App_rpt-users] CTCSS Drop Out
Time
Anyone know if
there is an adjustment of the time the transmitter stays keyed, and the
PL tone drops out and where that setting is?
With my rigs, I
still here the squelch crash after the repeater drops out. I would like to cut
the PL off a little sooner or delay the transmitter a little longer.
BTW, I'm all up and
running with the repeater function and the node! Thanks to all that helped
me get past the learning curve!
Thanks!
Merry
Christmas
73 Jim
W7RY
_______________________________________________
App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
No virus found in this
message.
Checked by AVG - www.avg.com
Version: 2012.0.1901 / Virus
Database: 2109/4700 - Release Date: 12/24/11