In xipar its
txrxdelay= 20 ms intervals.
AB3AA-Brian
Send App_rpt-users mailing list submissions to
app_rpt-users@ohnosec.org
To subscribe or unsubscribe via the World Wide Web, visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
or, via email, send a message with subject or body 'help' to
app_rpt-users-request@ohnosec.org
You can reach the person managing the list at
app_rpt-users-owner@ohnosec.org
When replying, please edit your Subject line so it is more specific
than "Re: Contents of App_rpt-users digest..."
Today's Topics:
1. Re: RXDELAY in XIPAR (Lu Vencl)
----------------------------------------------------------------------
Message: 1
Date: Mon, 22 Sep 2014 10:07:48 -0400
From: Lu Vencl <vencl@att.net>
To: Tim Sawyer <tim.sawyer@mac.com>
Cc: "app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org>,
"webmaster@n4yza.com" <webmaster@n4yza.com>
Subject: Re: [App_rpt-users] RXDELAY in XIPAR
Message-ID: <46719A95-463D-4B06-B7F6-6CDEB348E7FF@att.net>
Content-Type: text/plain; charset="utf-8"
Just made it long to test. But not effective. Probably only need 150 ms.
Lu Vencl
> On Sep 22, 2014, at 9:46 AM, Tim Sawyer <tim.sawyer@mac.com> wrote:
>
> Really? You need a 3 second delay?
> --
> Tim WD6AWP
>
>> On Sep 22, 2014, at 5:13 AM, Lu Vencl <vencl@att.net> wrote:
>>
>> I have a XIPAR node that needs a little support with pulseback removal. Never had to utilize this before, but when looking in URD.conf, I don?t see the rxdelay= parameter like I do on ACID builds. I went ahead and inserted the command into the file, but there does not seem to be any action.
>> Can someone confirm the parameter and placement?
>> Here is my example:
>> [usb]
>>
>> hdwtype=0 ; 0=std,1=dev
>> eeprom=0 ; unless you have a cable w/eeprom
>> duplex=0 ; 0=simplex, 1=duplex
>> invertptt=0
>> ;minsigproc=0 ; minimal signal processing
>> ;sendvoter=0 ; 0=default, no voter rssi, 1=enable voter rssi
>>
>> carrierfrom=usbinvert ; no,usb,usbinvert,dsp,vox
>> ctcssfrom=no ; no,usb,dsp
>> rxondelay=3000 ; Gets rid of the pulseback problem
>> ;rxboost=1 ; rx input boost of 20dB
>> rxboost=0 ; no boost
>> rxdemod=flat ; no,speaker,flat
>> txprelim=0 ; 1 = pre-emphasize and limit
>>
>> txmixa=voice ; no,voice,tone,composite
>> txmixb=tone ; no,voice,tone,composite,auxvoice
>>
>> ;txctcssdefault=77.0
>> ;rxctcssfreqs=77.0;
>> ;txctcssfreqs=77.0;
>> txtoctype=notone;
>>
>> rxsquelchdelay=900 ; delayline in ms carrier squelch tail eliminator
>> rxnoisefiltype=0 ; 0 for +/-5KHz, 2 for +/-2.5KHz systems
>>
>>
>> Lu,
>> KA4EPS
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users@ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20140922/20917ad4/attachment-0001.html>
------------------------------
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
End of App_rpt-users Digest, Vol 67, Issue 65
*********************************************