On Sun, 4 May 2014, Bob wrote:

After the ACID load is complete, using a DHCP router, I run "setup" from the
command prompt, and configure it manually, IP, netmask, gateway, and DSN.
When I do this on a WinXp machine in the TC/IP window, connects directly to
the public (static) IP just fine. When I do it on the Linux box with ACID,
eth0 can't find the connection.

Bob, what you are doing seems correct.  I tend to manually edit files, but there is nothing wrong doing it from 'setup'.  Bottom line, there is nothing in ACID that prevents this from working.  I think you probably just have some field wrong somewhere.

I would approach it bottom up - try pinging the from the AllStar computer to the gateway using IP addresses, then using a symbolic name to test NDS, and work your way up.  I bet you will find some subtle misconfiguraton somewhere is causing the problem.

73 Willem

================================================================
Dr. Willem A. Schreuder,  President,  Principia Mathematica
Address:  445 Union Blvd, Suite 230,  Lakewood, CO  80228, USA
Tel: (303) 716-3573   Fax: (303) 716-3575
WWW: www.prinmath.com   Email: Willem.Schreuder@prinmath.com
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.