I have done this using an old irlp interface take a look at this link.

http://www.qsl.net/k0kn/

the newest dial allstar release has parallel support in it.

look at the link for converting an old irlp node to all star it has info about the using the printer port
for what you need.

ken n1dot



On 2/9/2016 7:22 AM, Josh W4ZZK wrote:
Again, forgive me. New to this...
I have ordered a couple of CM-108 USB FOBs for the AllStar Project. I am curious... with the ability to do some script editing to use a PC's LPT Printer Port as a "GPIO" for COR, PTT, etc., could the Integrated Sound Card on the Mobo (which is mostly AC97 Chips) be used for Audio In and Out of the Computer? Running DIAL.

Thanks
Josh W4ZZK



_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.


This email has been sent from a virus-free computer protected by Avast.
www.avast.com