Hi Ramesh,
Hows it going? I think the OP may be trying to use DStar modulation (DV) with a URI. If that's the case, the OP will find the 6 pin DIN interface on the back of the radio will not suffice, as I believe that's for a TNC which would only operate under FM mode, thus the beeping response.
The OP is welcome to correct me, but if this is indeed what you'd like to do, you can't do it with an Icom radio, you'll need to build a modem. Look for "homebrew DStar radios" on Google.
Ta!
Shane.
On 12/11/2012 5:55 PM, radioman wrote:
Has anyone tried to interface a ID-880H to a URI
i'm using the PS2 plug on the back of the radio and every works but when
the URI tells the radio
to TX the radio just Beeps, in the DV mode
Anyone have any ideas?
<-- Hi Tony; Why would you have your 880H in DV mode? - shouldn't it be in FM mode? - presumably you're trying to setup some kind of hotspot since you're using a URI?
If this is the case, your 880 should be in FM mode. BTW - I wouldn't use an 880 or any other D-STAR radio for the hotspot radio - way too much of a radio for that.... use an el-cheapo FM (TRUE FM) radio.
Cheers,
Ramesh.
www.freestar.us
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users