Thanks Monty!
 
 
From: Monty
Sent: Wednesday, July 11, 2012 2:50 PM
To: pete M
Cc: APP RPT
Subject: Re: [App_rpt-users] echolink stuff
 
It is a setting in /etc/asterisk/rpt.conf:
 
eannmode=3                     ; Default: 1 = Say only node number on echolink connects
                                        ; 2 = say phonetic call sign only on echolink connects
                                        ; 3 = say phonetic call sign and node number on echolink connects
 

Monty


On Wed, Jul 11, 2012 at 11:22 AM, pete M <petem001@hotmail.com> wrote:
Is there a way for a node to specify the call sign rather then the node number whe they connect from echolink? ( I am using the acid distro)
 
If someone connect by the portal we can hear that ve2xx conected, but from the echolink we will hear node 12345 connected..
 
And where can I write information, like on echolink, that describe the repeater and stuff..
 
And finally is there a how to for the echolink part, did not found much..
 
Pierre
VE2PF
 
 
 
 

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users