Hi Steve,
Thanks for the reply. Could it be my IAX2 is not registering properly???
e.g
*CLI> iax2 show registry
Host                  dnsmgr  Username    Perceived             Refresh  State
67.215.233.178:4569   N       A2534       <Unregistered>             60  Request Sent

Any ideas why this would not be the case?
Would the DNS you mentioned problem cause this?
I have setup my router to divert all incoming traffic to the asterisk server just in case but it makes no difference..

regards

Anthony VK2ACP



On Sun, Jan 17, 2010 at 8:15 AM, Stephen Rodgers <sales@qrvc.com> wrote:
Anthony Percy wrote:
> Hi all,
> I just fired up my test node and when I try to get a node list I get the
> following error when I turn verbose mode on..
>
>  /usr/bin/wget -v -O /var/lib/asterisk/rpt_extnodes-temp
> http://nodes1.allstarlink.org/cgi-bin/nodes.pl
> --2010-01-16 21:09:39--  http://nodes1.allstarlink.org/cgi-bin/nodes.pl
> Resolving nodes1.allstarlink.org... 64.62.228.97
> Connecting to nodes1.allstarlink.org|64.62.228.97|:80... connected.
> HTTP request sent, awaiting response... 500 Internal Server Error
> 2010-01-16 21:09:40 ERROR 500: Internal Server Error.
>
> I have checked and my registration password is OK for node 27010...
>
> Regards
>
> Anthony VK2ACP
>
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users@qrvc.com
> http://qrvc.com/mailman/listinfo/app_rpt-users


With all our domain names down due to a problem with our DNS provider, I can't see what is going on at the moment.
The problem may not be on your end due to this issue.