Thanks Steve, this is what I have set: 

duplex = 0                              ; 0 = Half duplex with no telemetry tones or hang time.

linktolink = yes                        ;     Special Case: Full duplex if linktolink is set to yes.

                                        ;     This mode is preferred when interfacing with an external multiport repeater controller.

Should I still be getting ID's in this case? 

On Wed, Apr 6, 2016 at 10:12 AM, Steve Zingman <szingman@msgstor.com> wrote:

Stephen,
Take a look at the duplex setting at the top of rpt.conf

more if you need it...
73, Steve N4IRS

On 4/6/2016 9:18 AM, Stephen - K1LNX wrote:

This is not glaringly obvious to me... so I'm wondering if it's possible or supported. I have my URI tied into a port of my repeater controller specifically for Allstar access and a few other things, and my ID requirement is being handled by the controller itself. 

How do I disable the ID coming from app_rpt? I saw these options in the rpt.conf file, but I wasn't sure if commenting them out or setting the time to "0" would effectively disable it? 

idrecording = |iK1LNX                   ; id recording or morse string see http://ohnosec.org/drupal/node/87

idtalkover = |iK1LNX                    ; Talkover ID (optional) default is none see http://ohnosec.org/drupal/node/129

idtime = 540000                         ; id interval time (in ms) (optional) Default 5 minutes (300000 ms)

politeid = 30000                        ; time in milliseconds before ID timer expires to try and ID in the tail. (optional, default 30000)

tnx

Stephen

K1LNX

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 

-- 
"Anything is possible if you don't know what you are talking about."
1st Law of Logic

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.