----- Original Message -----From: Lu VenclTo: Don HacklerSent: Saturday, October 06, 2012 12:32 PMSubject: Re: [App_rpt-users] mpg123: no process killed - Asterisk endedwith exit status 1Did the new install again with a new cd I burned and still have the same issue.
Sent from my iPhone, Lu VenclI had the same thing… about 5 minutes later asterisk would finally stay up, but there would be other problems when I would try tomake connections to radios work. One way audio, among other things. I spent a few days trying to troubleshoot it.When I finally did a fresh download and re-installed from scratch, everything just came up and worked as expected.The other problem I had with that bad disk was the dictionary package was missing, so when you tried to set thepassword during the install, the root password wasn't getting set, so I would have to boot it in single user mode and force a password into it.
On Oct 6, 2012, at 4:41 AM, "Lu Vencl" <vencl@att.net> wrote:
Very interesting.. I will try that and report back..The odd thing is that Asterisk will eventually start, but it takes about 5 minutes or so to settle down.KA4EPSFrom: Don Hackler [mailto:donh@sigma.net]
Sent: Saturday, October 06, 2012 3:00 AM
To: app_rpt-users@ohnosec.org
Cc: Lu Vencl; Scott Weis; Steve Agee
Subject: Re: [App_rpt-users] mpg123: no process killed - Asterisk endedwith exit status 1When I had this problem, I tried to install a few times and kept coming up with this error. I had to download a fresh copy of the install CD tocorrect the problem. There was a subtle problem in the downloaded bits on the first CD.On Oct 5, 2012, at 10:44 PM, Steve Agee <n5zua@earthlink.net> wrote:I'm having this issue as well on a fresh install. The machine is 64 bit:[Oct 5 22:42:47] ERROR[23279] asterisk.c: Asterisk has detected a problem with your Zaptel configuration and will shutdown for your protection. You have options:
1. You only have to compile Zaptel support into Asterisk if you need it. One option is to recompile without Zaptel support.
2. You only have to load Zaptel drivers if you want to take advantage of Zaptel services. One option is to unload zaptel modules if you don't need them.
3. If you need Zaptel services, you must correctly configure Zaptel.
mpg123: no process killed
Asterisk ended with exit status 1
Asterisk died with code 1.
Automatically restarting Asterisk.N5ZUA----- Original Message -----From: Scott WeisSent: Friday, October 05, 2012 9:23 PMSubject: Re: [App_rpt-users] mpg123: no process killed - Asterisk endedwith exit status 1Your system most likely updated it’s kernel.. So you need to rebuild/install zaptel.From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Lu Vencl
Sent: Friday, October 05, 2012 9:42 PM
To: app_rpt-users@ohnosec.org
Subject: [App_rpt-users] mpg123: no process killed - Asterisk ended with exit status 1Anyone know why a new node I just built goes through several of these before settling down after a reboot?I have hear this complaint from someone else before, but he can’t remember what he did to fix his node.ThanksLuKA4EPSAutomatically restarting Asterisk.mpg123: no process killedAsterisk ended with exit status 1Asterisk died with code 1.Automatically restarting Asterisk.mpg123: no process killedAsterisk ended with exit status 1Asterisk died with code 1.Automatically restarting Asterisk.mpg123: no process killedAsterisk ended with exit status 1Asterisk died with code 1.Automatically restarting Asterisk.mpg123: no process killedAsterisk ended with exit status 1Asterisk died with code 1.Automatically restarting Asterisk.mpg123: no process killedAsterisk ended with exit status 1Asterisk died with code 1.Automatically restarting Asterisk.mpg123: no process killedAsterisk ended with exit status 1Asterisk died with code 1.Automatically restarting Asterisk.mpg123: no process killedAsterisk ended with exit status 1Asterisk died with code 1.Automatically restarting Asterisk.mpg123: no process killedAsterisk ended with exit status 1Asterisk died with code 1.Automatically restarting Asterisk.mpg123: no process killedAsterisk ended with exit status 1Asterisk died with code 1.Automatically restarting Asterisk.mpg123: no process killedAsterisk ended with exit status 1Asterisk died with code 1.Automatically restarting Asterisk.mpg123: no process killedAsterisk ended with exit status 1Asterisk died with code 1.Automatically restarting Asterisk.mpg123: no process killedAsterisk ended with exit status 1Asterisk died with code 1.Automatically restarting Asterisk.mpg123: no process killedAsterisk ended with exit status 1Asterisk died with code 1.Automatically restarting Asterisk.
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users