You might also try out NodeShark

http://www.arizuni.com/NodeShark/

Ken

From: Alan Adamson [mailto:adamson_alan@hotmail.com]
Sent: Wednesday, June 13, 2012 6:49 PM
To: 'Ken'
Subject: RE: [App_rpt-users] Debugging

I wish, but there is nothing in that file except the usual suspects… no reference to a time out or anything close to it… I of course went there first.

Alan

From: Ken [mailto:ke2n@cs.com]
Sent: Wednesday, June 13, 2012 6:47 PM
To: 'Alan Adamson'; 'app_rpt mailing list'
Subject: RE: [App_rpt-users] Debugging

You may find what you are looking for in

/var/log/asterisk/messages

Ken

From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Alan Adamson
Sent: Wednesday, June 13, 2012 10:38 AM
To: 'app_rpt mailing list'
Subject: [App_rpt-users] Debugging

So my IRLP node last night decided to hold the PTT active for longer than its timer…. I got a PTTLOCK timeout…. I have no idea why, it was connected to a reflector at the time. 

But it most likely caused the allstar node that it was connected too to timeout first…. Question is, where if at all, is that stuff logged in the allstar environment?

Or how can I setup logging to monitor either RX or TX timeouts?

Alan