If you are using PL on the repeater, they maybe some options for you. If you are not using PL, then you will have to look at options where a shorter squelch tail is used.
We run similar setups here at some of sites – taking advantage of PL to give the desired results.
We are using USBradio.
Keith
On 11/13/13 9:01 AM, "Angelo Glorioso" <n5uxt@hotmail.com> wrote:
Good All,
We have a node coming up in Lake Charles, La and we are having issues. So, I am asking for configurations suggestion. First off, the Allstar node is not going to be at the repeater site. It is at a remote site.
It is running on GM300 with URI interface. The repeater has a long squelch tail of about 2 second. I have tried to run with USB radio in half duplex mode but the node ends up ping ponging with the repeater in half duplex mode .
Is it better to use simpleusb or USBradio for this type of setup?? Should the repeater squelch be reduced or turned off all together.
Please offer a copy of either USBradio or simpleusb configuratio file pretty please.
Any help would be appreciated.
7 3 de Angelo
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
--
keith@goobie.org
Keith Goobie
Richmond Hill, ON, CANADA