You have no control of announcements from other nodes you are connected to.

If you think about that, others telemetry is important to know if you are going to be connected to them. Otherwise, you could interfere with pending operations.


...mike/kb8jnm

-------- Original Message --------
Subject: [App_rpt-users] Telemetry Help
From: W2YMM <w2ymm1@gmail.com>
Date: Fri, January 17, 2014 5:37 pm
To: App_rpt-users@ohnosec.org

Hello, I wanted to know if there is a way to shut off or limit announcements that I hear on my Allstar node.
When connected to a large hub I very often hear "Remote Already In This Mode" and I'll hear when stations connect and Disconnect from each other, or if a call fails.
I'd like to turn that off, but can't seem figure out where to do it.
I looked at the Telemetry section here    http://ohnosec.org/drupal/node/102
but It doesn't look like anything on my node.. At least in /etc/asterisk/rpt.conf

Any help would be greatly appreciated.
Thanks

Robert Prybyzerski Jr
W2YMM
631-960-1051
http://www.w2ymm.com
Allstar 28183

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users