On Dec 26, 2014 3:01 AM, "larry" <larry@n7fm.com> wrote:

Going to create some macros but need to understand this sequence before hand.

I want to create a macro that connects a node to another node/hub in the (*2 monitor only) mode.

Later if I wish to change that same connection to a (*3 transceive) mode.
Would a macro need to first issue a *1 disconnect and then reconnect with a *3 function or can you just issue the *3 command and toggle directly from monitor to transceive?

I assume whatever sequence works in one direction would hold true if going in reverse from tranceive to monitor only.

Thanks
Larry - N7FM



_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.