Sure sounds like you have duplex=2 in rpt.conf. If this is a simplex node set duplex=1

The install default is 2 - it really should be 1 as this would solve a lot of novice startup issues!

73 Doug
WA3DSP
http://www.crompton.com/hamradio

---

Date: Sat, 19 Apr 2014 15:50:36 -0700
From: 41.2jim@gmail.com
To: app_rpt-users@ohnosec.org
Subject: [App_rpt-users] odd URIx behavior

green lite flashes like it is working but no receive audio until.... you kerchunk the node(weather connected to another node or HUB same issue must kerchunk it to here the audio and looks correct on the CLI screen connecting or disconnecting with no on screen errors at verbose 3) and then you get receive and when in TX no output audio at all and if you hold the the HT key the node will drop and come back to TX and drop again and will go on for ever (well 5 minutes worth) seems to hold TX for like 2 seconds then un-keys (drops TX) then keys up again on its own.

History: the node did work for one day (both tx/rx) and the owner turned off the node, and unplugged for a thunder storm and on power up had this issue next day. After 3 different computers and same problem I'm left with either a software issue in the install(all 3 computers not likely) or its the URIx its self. I have set up 6 different Allstar nodes and have ran into a bunch of different problems and got them all fixed with the help of this group and I'm turning to the group again for help ....any ideas??

Thank you all in advance for the help

        Jim Frederick KF6QBW
I Live to Transmit & Transmit to Live
        446.600-  103.5 PL Repeater
           AllStar Node # 28839

                Skype = jim41.2

_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.