Thanks Tim and Kyle for your responses. I now know how to start.
73,
Eric
4Z1UG / WA6IGR
Allstar Node: 28422
Check out my Podcast at: www.qsotoday.com
Israel Direct: 077-950-9451
USA Direct: +1-720-377-3840
Skype: ericrguth
From: Tim Sawyer [mailto:tim.sawyer@mac.com]
Sent: Tuesday, April 07, 2015 12:53 AM
To: Eric Guth
Cc: app_rpt-users
Subject: Re: [App_rpt-users] Play audio file based on node numbers connected
There is a command for that called ilink,5. Which touch tone command your system uses for that command is optional. Look through your rpt.conf for ilink,5 and you may see something like
70=ilink,5 ; say link status
In this case the touch tone command is *70. If the above line or similar is not there you can add it or one like it. Then restart Asterisk. Now when you play *70 it will read the node ‘numbers’ that are connected to you.
To get it to say “Win system” instead of “Node 2560” you have to make a recording and place in in the correct directory. That is documented here: http://docs.allstarlink.org/drupal/node/131 and here http://images.ohnosec.org/app-rpt-audacity.pdf
--
Tim
:wq