I use an external delay board.  Works fine.  I also use an RTCM.  

On Jan 19, 2018 10:13, "Tim Sawyer" <tisawyer@gmail.com> wrote:

No, not in DIAL. I think the HamVoIP guys do this but they won't share their source code.   

On Tue, Jan 16, 2018 at 10:06 AM, DuaneVT . <selkie2@comcast.net> wrote:

We use RF links back to a Hall audio voter. Unkeying the mobile allows a short noise burst to come through as the link keying drops as fast as possible to prevent the voter from voting on "full quieting" dead carrier. Is there a way to delay the audio maybe 100 mS to allow the COR to mute the transmitter?

Thanks, 

Duane  KA1LM  42996

_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

--

Tim WD6AWP

_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.