Ken
Thanks for the help I got it to
work
Add to rpt.conf to
the box you want tones to pass from
propagate_dtmf =
yes ; DTMF sent to
system from link gets
; repeated onto main system
output(optional)
Then use the *4 remote command
for that node. Any dtmf tone will now pass through the link. This works
great for my application it allows me to control a non asterisk controller from
the other end.
Neal
From: Ken
[mailto:ke2n@cs.com]
Sent: Friday, April 01, 2011 5:25
PM
To: 'Neal Garbenis'; app_rpt-users@ohnosec.org
Subject:
RE: [App_rpt-users] regenerate dtmf touchtones
If “the controller” on the other
end is Asterisk, then you can use the “remote command”
feature
http://ohnosec.org/drupal/node/21
You do *4 and the remote node
number as the “command”.
After that, the next command you
send to your local node gets passed through to the remote node - and executed
there.
GL
Ken
KE2N
From:
app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org]
On Behalf Of Neal Garbenis
Sent: Friday, April 01, 2011 7:08
PM
To: app_rpt-users@ohnosec.org
Subject: [App_rpt-users]
regenerate dtmf touchtones
Is it possible to send or regenerate a dtmf tone across
a link without being muted. I want to be able to control a linker II
controller over the link if possible. I have tried the ilink dtmf commands
set up in macros with no success. They don’t make it through to the
controller I am trying to control on the other end.
Thanks
Neal
NG8Y
No virus found in this
message.
Checked by AVG - www.avg.com
Version: 10.0.1209 / Virus
Database: 1500/3546 - Release Date: 04/02/11