From the asterisk CLI prompt:
iax2 show registry
Host                  dnsmgr  Username    Perceived             Refresh  State
67.215.233.178:4569   Y       1234        123.456.789.001:22239       60  Registered

Should look like above.

Check your iax.conf for the proper node number and password.

73, Steve N4IRS


On 5/1/2017 3:34 PM, Erich Ellsworth wrote:
Greetings,

I am currently using a Cisco 7960 connected to my Raspberry Pi 3 to mess around with AllStarLink. (Node 43966)
Currently, I am able to connect to other nodes perfectly, however I am unable to receive connections from other nodes.

According to this troubleshooting guide, the issue could be the following...

1.) Port 4569 UDP is not set up to be forwarded to the correct internal address. 
2.) My router requires that the port setting to be forced to port 4569 on the registration server.

I believe that #1 is ruled out because I have double checked that the internal address is correct. (My router is a Asus RT-AC68P)

Could a system administrator double check that my node is registering properly?

Thanks,
Erich KG5KEY


_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.