I missed that fact that it’s a private node. It that case you do not need, in fact can’t, modify the server entry on the portal.

In addition to Doug’s example below there are a couple of things to add. In the local [nodes] stanza in rpt.conf the loopback needs the port. And it needs a list of all the other private nodes you want to connect. If the other end was node 1000 then the local [nodes] stanza would look like this:

[nodes]
1100 = radio@127.0.0.1:4570/1100,NONE
1000 = radio@IP_address_of_1000:port_if_not_4569/1000,NONE
 
Also, if you don’t have a registered public node you will not be able to connect to other public nodes.

--
Tim
:wq

On Oct 31, 2014, at 6:32 PM, Doug Crompton <doug@crompton.com> wrote:

In extensions.conf -

[radio-secure]
exten => 1100,1,rpt,1100

The entry in rpt.conf would be -

[nodes]
1100 = radio@127.0.0.1/1100,NONE

and in iax.conf -

[general]
bindport=4570

The OTHER end of the connection would need an rpt.conf entry like -

[nodes]
1100 = radio@ip_address_of_1100:4570/1100,NONE

Note that the IP address above is the local IP address if on the same network or the public IP address if remote. In that case it would also have to be port forwarded in your router. If the node 1100 was connecting to was also private it would need to have an entry in it's nodes stanza of rpt.conf with the address and port information of the remote node.  

73 Doug
WA3DSP
http://www.crompton.com/hamradio


From: petem001@hotmail.com
To: app_rpt-users@ohnosec.org
Date: Fri, 31 Oct 2014 20:40:55 -0400
Subject: [App_rpt-users] connecting on private node number from an allstar node

Ok I amsure it has been discussed before.. but google is not my friend tonight..

So I got that private node at a fix ip on the net.the port it run on is 4570 (4569 was not available cause of an asterisk pbx on the smae network) 

the node number is 1100

I know I have to add this to the node stanza in rpt.conf

1100 = radio@ipadressofthenode:4570/1100,NONE

But do I have to add something else somewhere?

I was under the impression I had to add something in extension.conf? 

Thanks for the help

ve2pf



_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.