Short answer:
Switch it to simple USB and see if the audio issues go away. Easy enough to switch.

What hardware, CPU, RAM are you running?

73, Steve N4IRS

On 11/18/2015 12:17 PM, Robert Newberry wrote:

So I've been on my never ending quest of learning linux. So I was reading about simpleusb and usbradio...please no debates versus quality!

I came across a reference to the top command and if asterisk takes up more than 20% or more I should consider simpleusb.

Well one of my sites running two nodes which is having audio issues! Is swinging from 20-40% never dipping below 20%

Thanks

N1XBM
Apparare Scientor
Paratus Communicare
Allstar Node # 27086, 41540, 41812, 42086
    



_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.