I am helping a friend with a new node.  He has a URI-X, Kenwood TM-d710 and DIAL.

 

TX audio is working fine.

RX audio is not.  I have the usbradio.conf file set with carrierfrom=usb

 

If I change it to carrierfrom=usbinvert then I can get DTMF through and audio, but it is keyed 100% of the time and no TXAudio works.

 

So it seems it should be set for usb.

 

I tried DSP, didn’t seem to work either.

 

The cable between the URI-X and the d710 uses the PS2 connector and is a pre-made cable from uricables.com

 

I am at a loss of what else to try, should I build the loopback tester that I see in the archives?

 

Mike

Kb8zgl

 

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 

-- 
"Just say no to world domination"