Put this under your [functions] stanza. Make xx whatever you want for the disconnect command.

xx=ilink,6 ; disconnect all nodes

Here a list of ilink commands from the app_rpt source

* ilink cmds:

* 1 - Disconnect specified link

* 2 - Connect specified link -- monitor only

* 3 - Connect specified link -- tranceive

* 4 - Enter command mode on specified link

* 5 - System status

* 6 - Disconnect all links

* 7 - Last Node to Key Up

* 8 - Connect specified link -- local monitor only

* 9 - Send Text Message (9,<destnodeno or 0 (for all)>,Message Text, etc.

* 10 - Disconnect all RANGER links (except permalinks)

* 11 - Disconnect a previously permanently connected link

* 12 - Permanently connect specified link -- monitor only

* 13 - Permanently connect specified link -- tranceive

* 15 - Full system status (all nodes)

* 16 - Reconnect links disconnected with "disconnect all links"

* 17 - MDC test (for diag purposes)

* 18 - Permanently Connect specified link -- local monitor only

On Sun, Mar 19, 2017 at 8:36 PM, Bryan Fields <Bryan@bryanfields.net> wrote:

I've been looking for a version of this command which will remove all
connected links excluding permalinks.

It doesn't appear there is an easy way to do this in the code, does anyone
have any ideas as how to do it?

73's
--
Bryan Fields

727-409-1194 - Voice
http://bryanfields.net
_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

Tim