Thanks, I’ll give a go.

---

From: Chris Andrist [mailto:chris@yeahmon.net]
Sent: Tuesday, April 29, 2014 8:26 PM
To: Bob
Cc: app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] Asterisk ended with exit status 1 ...

Bob,

Once it boots up login and type the command

# service asterisk stop

Then read the log file

# nano /var/log/asterisk/messages

You will have to scroll to the bottom of the file to find out the problem.

Usually I run the following sequence of commands

# service asterisk stop

# rm -Rf /var/log/asterisk/messages

# service asterisk start

Let it run until you get the error then:

# service asterisk stop

# nano /var/log/asterisk/messages

--

Regards,

Chris Andrist

On Apr 29, 2014, at 9:22 PM, "Bob" <kk6ecm@gmail.com> wrote:

I had an error in my IP address. Went into setup, and made the change. I then entered “service network restart,” then “service asterisk restart.”

I then it happened...

Asterisk ended with exit status 1
Asterisk died with code 1.
Automatically restarting Asterisk.
mpg123: no process killed

Have not been able to stop it. I tried powering down the computer, and did a restart... tried and “service asterisk restart” again, and the errors continue. Any suggestions?

Thanks,

Bob

kk6ecm

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.