Hi All,

After surveying all of the repeater sites, two of them are not good locations for direct internet access.  The WISP is too slow or has way too much jitter.

As a plan B will be attempting a 420mhz full duplex backhaul link to an IP connected node.

On those “bad” sites we will be using app_rpt in a standalone mode as a local repeater controller. 

Here is my cost saving question…  Using one URI is there a way to use the right channel for node A (main repeater) and the left channel for node B (backhaul 420 link)?   I can use a parallel port as needed for I/O if that is an issue…

Pete