Do they have discriminator/detector audio?? No they dont! and they also lack PRE/DE on audio..you get "Speaker Audio" complete with hiss.
They sound and perform like shit...


On Wed, Jun 11, 2014 at 5:22 PM, Jim W7RY <w7ry@centurytel.net> wrote:
Baufongs most certainly do have a cor output. They have a busy light don’t they?  YES they do!
 
There are schematics on the internet for the Baofeng portable. You just have to dig for it.
 
73
Jim W7RY
 
 
From: Scott Weis
Sent: Wednesday, June 11, 2014 12:40 PM
Subject: Re: [App_rpt-users] Does anyone have a working circuit diagramfor Baofeng/Kenwood to URIx?
 

I doubt you will find much help anywhere. Baofeng radios lack COR and discriminator output so they would not be suitable for use with allstar. The only portable I know of that works is the Kenwood F6 with it mic/speaker port set for packet mode. But the duty cycle required for allstar or any repeater/remote base is fairly high and portables are not suitable for long term use.

 

From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Steven Donegan
Sent: Wednesday, June 11, 2014 3:21 PM
To: 'App RPT Users'
Subject: [App_rpt-users] Does anyone have a working circuit diagram for Baofeng/Kenwood to URIx?

 

I am looking for a circuit diagram so I can fabricate a cable to connect a URIx to a Baofeng (or pair of Baofeng's) suitable for use with ACID/Allstar. Any assistance would be useful. I have not found anything on the web thus far...

 

____________
Steven Donegan
KK6IVC
SSCC/NORC Life Member, Car #86
www.sscc.us

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.


_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.