Yes I am running Flat TX (Pin5)
The Radio is doing all the ENC/DEC
Running simpleusb.conf so there are no extra settings
for PL. I am downloading from the web my conf files. And I
think I may have a bad profile on the web so will be looking
into the conf files from the machine now.
I talked to Bob (W5EVH) and my audio got crummy after
10 mins of talking. So we are thinking its a bad Motorola or
a flaky one.
Tried Tim's recommendation and simpleusb-tune-menu
seems to have fixed her!
Thanks guys.
From:
Lu Vencl <vencl@att.net>
To:
'app_rpt list' <app_rpt-users@ohnosec.org>
Sent:
Saturday, October 29, 2011 5:11 AM
Subject:
Re: [App_rpt-users] Female Voice too loud
Are you running your TX
audio to the flat input or mic input?
If you are running the
mic input and not relying on the PL encoder on the
radio and trying to send PL into the radio via
mic, this will cause problems.
Be sure to use the flat
TX input.. If not, then change the radio to encode
PL and turn the PL off on the URI side.
Lu
KA4EPS
Try simpleusb-tune-menu
On Oct 28,
2011, at 8:33 PM, Jesse Royall wrote:
Female voice is too
loud on the system. Sometimes she overides
the PL tone and causes clipping.
Is there a way to
turn her down? OR even a way to adjust the
audio perimiters?
Running simpleusb
setup. GM300. DMK.URI
No radio tune menu so
I can't adjust the audio in simpleusb
mode.
When running
radio-tune-menu
Error parsing
device parameters
Tried copying
txmixaset=500 perimeter into the
simpleusb.conf and no changes. Tried
changing to lower value no change.
CLI error on
simpleusb_tune_usb27978.conf
cp simpleusb.conf
simpleusb_tune_usb27987.conf and no
changes
doubled checked the
txmixaset=500 and added that again with
no change.
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users