On Wed, Oct 19, 2011 at 7:14 AM, Bote Man <bote_radio@botecomm.com> wrote:

This is something that has puzzled me for a while, since sometimes I see this behavior and other times I don't. I already know that individual USB devices can be uniquely identified, as demonstrated on my work computer where each time I plug in a different serial USB device it creates yet another Com port. I think I'm up to Com 77 after testing that many devices for work!

But you're saying that the specific USB connector port on the computer also has a unique identity? That can really hamper operations in some (many?) cases if so.

At the very least there should be means simply to detect the USB device and forge ahead regardless of which port it is plugged into.

Bote

From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of David KE6UPI
Sent: Tuesday, 18 October, 2011 22:36

Hello Bob, Do you get the error without the DMK URI? Also you need to use the same USB port that you used at install. If you move the URI to a different USB ports you will get errors.

David
On Tue, Oct 18, 2011 at 11:46 AM, Bob Miller <K7ZH@skywriting.net> wrote:
After one week of satisfactory operation, my Allstar node (27890) has the following error:

"USB 4-1 usbfs: 27618 (asterisks) did not claim interface 3 before use"

Error code 1, then the computer reboots its self. The five digit number changes, but the problem just keeps repeating. The only USB device connected is the DMK URI (9080).

Cause of the problem? How to fix the it? Thanks in advance for any help.

73, Bob

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users