[In Yoda voice... mmmmm, very peculiar configuration, this is]

I believe the issue is with TLB. I dont think it can deal with more then 1 Asterisk station connecting to it
from the same IP address to the same UDP port. I believe that why it supports multiple "listen" ports.

Try defining 2 UDP ports (in a comma delimited list (or something), I believe) in the tlb.conf
for each node, and have a unique entry for each node to connect to a different UDP port on
the TLB system. I think this may fix your problem.

I really am no expert on TLB things.

JIM WB6NIL

---

Date: Tue, 7 Dec 2010 15:55:33 -0600
From: kd0eav@clear-sky.net
To: app_rpt-users@qrvc.com
Subject: [App_rpt-users] chan_tlb - Cross-Talk Issues

I've been working on setting up two TLB conferences that I wish to bridge over into two Allstar Link nodes ...

I've been successful at attaching both of the conferences to their two separate Allstar nodes. My intention is to have them run exclusively of each other - with the ability to bridge the Allstar nodes together as needed.

They are currently spread between two servers (and 3 IP addresses)...

____Server 1_________________
Allstar 27097
Allstar 27521
TLB - Echolink *KD0EAV* (attached to 27097)


____Server 2_________________
TLB - Echolink *MISSOURI* (attached to 27521)


The issue is that when I have both 27097 and 27521 on the same server, ANY traffic from 27097 will appear on the *MISSOURI* conference (only attached to 27521)... and  any traffic on 27521 will appear on *KD0EAV* (only attached to 27097)... even though they ARE NOT in ANY WAY bridged together. BUT - this is only true for traffic which is on the AllStar side of things... if somebody responds to me on the TLB conference it is NOT routed back over. It only flows one way... FROM Allstar TO TLB... It shows in TLB to be from the other Asterisk node.




____Server 1 Allstar tlb.conf_______
[tlb0]
call=Allstar 27097      ; Call of the app_rpt station
port=44966              ; Start of UDP port range (this port, port + 1)
astnode=27097           ; app_rpt node associated with this instance (for incoming connections)
context=radio-secure    ; Asterisk context for incoming connections
codec=GSM               ; Default CODEC to be used
ipaddr=208.110.93.103   ; Bind2IP address

[tlb1]
call=Allstar 27521      ; Call of the app_rpt station
port=44968              ; Start of UDP port range (this port, port + 1)
astnode=27521           ; app_rpt node associated with this instance (for incoming connections)
context=radio-secure    ; Asterisk context for incoming connections
codec=GSM               ; Default CODEC to be used
ipaddr=208.110.93.103   ; Bind2IP address

[nodes]
1424491 = *KD0EAV*,208.110.93.108,44966
1452514 = *MISSOURI*,216.229.80.7,44968




____Server 1 TLB tlb.conf__________
Bind2IP = 208.110.93.108
RTP_Port = 44966
StartupCmd = connect -r -n -f -p 44966 208.110.93.103



____Server 2 TLB tlb.conf__________
Bind2IP = 216.229.80.7
RTP_Port = 44968
StartupCmd = connect -r -n -f -p 44968 208.110.93.103



Thanks for all your work on this!! It held up to quite a lot of abuse last night....

73

- Jeremy, KD0EAV


_______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users