This will work.

If you want perm connect use

*83(node) to connect it.

And to brake the connection use *81(node).

If the internet is bad it may disconnect but it will reconnect as soon as it is able with no announcement.

If a node is connected via perm connection, normal disconnect like *1(node) or *10 wont work. You must use the Perm disconnect if connected with perm connect.

Jon VA3RQ

On 8/15/2012 3:12 PM, Tim Sawyer wrote:

Sure is. I add those to my [functions] stanza

81=ilink,11 ; Specifc Link permanent disconnect

82=ilink,12 ; Specifc Link permanent monitor

83=ilink,13 ; Specifc Link permanent transceive

--
Tim
:wq

On Aug 15, 2012, at 11:33 AM, Michael J. Wolthuis <wolthui3@msu.edu> wrote:

We have a node that seems to have a somewhat unstable Internet provider…. It disconnects a lot… Is there a way to make it auto-reconnect when it is available again?

Ie. Permanent link?

Mike

Kb8zgl

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users